DSpace
 

Academic Knowledge Archives of Gunma Institutes >
群馬大学(Gunma University) >
50 工学研究科 >
5002 機械システム工学専攻 >
学術雑誌論文 >

Please use this identifier to cite or link to this item: http://hdl.handle.net/10087/5682

Title: Heat Transfer of a Liquid-Solid Contact in a Subcooled Pool Boiling System : Transition-Type Boiling Regime and Minute Bubble Emission Boiling Regime
Authors: INADA, Shigeaki
MIYASAKA, Yoshiki
SAKUMOTO, Masakazu
Keywords: Phase Change
Heat Transfer
Liquid-Solid Contact
Void Signal
Subcooled Pool Boiling
Transition-type Boiling
Minute Bubble Emission
Issue Date: 16-Dec-1987
Publisher: 社団法人日本機械学会
Citation: JSME international journal : bulletin of the JSME. 30(270), 1957-1964 (1987)
Abstract: This report describes liquid-solid contact behavior in the subcooled pool transition-type boiling regime and the minute bubble emission boiling regime, detected by a void probe that uses a series-resonance circuit. This probe can approach the heated surface within two to three micrometers. The liquid-solid contact state discussed in this report means the nucleate boiling state caused by liquid invasion or Leidenfrost state caused by liquid rush onto the dry part on the heated surface. The dried area on the heated surface was estimated on the basis of the void signal, and the relation between the dried area on the heated surface and the measured heat flux was clarified by introducing a nucleate boiling model.
URI: http://hdl.handle.net/10087/5682
ISSN: 0913185X
Appears in Collections:学術雑誌論文

Files in This Item:

File Description SizeFormat
JSMEIJ30_1957.pdf1.12 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

DSpace Software Copyright © 2002-2010  Duraspace - Feedback